Industrial Machinery

Fives HPM Pitches Robot-Based Machining for Large Parts Down to 0.1 mm Tolerances

The Liné Machines RoboTDM mounts a spindle end effector on an industrial robot to mill, trim and drill oversized workpieces that do not justify a large CNC machine envelope.

Nadia FaroukOctober 29, 20265 min read7 views

A multi-axis robot arm carrying a spindle end effector mills the curved edge of a large composite panel in a factory bay, with calibration lines tracing its tool path.

Fives High Precision Machines (Fives HPM) is positioning its Liné Machines RoboTDM as an alternative to large CNC machine tools for components whose tolerances can be held at around 0.1 mm, or tenths rather than hundredths of a millimetre. The system mounts a spindle, toolholder and cutter on an industrial robot and brings the cutting tool to the workpiece instead of moving the part into a large machine envelope.

The company's argument is that for some work, buying a large CNC machine means paying for capability the job does not need, and that a robot-based approach can shorten setup, simplify programming and avoid the cost and floor space of a large machine tool.

Where the system fits

According to Fives, the RoboTDM is intended for face milling and deburring, including burr removal on castings and trimming of excess weld beads. It can also drill pilot holes in large aerospace panels and automotive body parts, and handle trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.

The technology belongs to Fives' Material Removal (MR) business line. Rather than feeding an oversized component through a conventional machine, the machining head travels to the part, which the company says can pay off in flexibility, cost and cycle time for suitable applications.

Closing the accuracy gap

Conventional industrial robots typically achieve tolerances of about 0.3 mm, which Fives says is not sufficient for many machining tasks. The RoboTDM development work concentrated on that shortfall through high-precision robotic machining: robot calibration combined with look-ahead and motion-planning algorithms that process programs containing more than one million points without the latency that can otherwise disrupt robot motion.

Fives states that this yields smoother trajectory execution, supports multi-axis contouring and complex operations in a way closer to CNC machining, and cuts machining deviation by up to 100 μm (0.1 mm) — a threefold improvement over conventional robotic accuracy.

Cycle time and configuration

The company reports that a multi-year R&D project and development trials demonstrated cycle time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings.

  • Spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm
  • HSK A63, HSK F63 or HSK A100 taper toolholders, with spindle size, power, torque and speed configurable to the task
  • Automatic tool changing, tool measurement, tool-breakage detection and part probing; a vision system can support drilling
  • Configurable for waterjet cutting, laser profiling and ultrasonic cutting in addition to machining
  • Multiple workstations and customised peripheral equipment, with relatively modest foundation requirements compared with a large CNC machine tool

Limits and company context

Fives is explicit that the technology does not address every machining challenge: where tolerances tighter than 0.1 mm are required, a high-precision CNC machine remains the appropriate choice, and the RoboTDM is presented as complementary to the wider Liné Machines and Fives HPM machine tool portfolio. The company sees particular potential in aerospace, defence, maritime and energy, where component dimensions can be substantial and production requirements vary considerably.

Fives Liné Machines Inc, now part of Fives HPM, has had a North American presence for almost 50 years through its facility in Granby, Quebec, Canada. The plant produces Liné CNC machine tools and robotic solutions including the RoboTDM, and hosts engineering, integration, automation, service and training support across equipment lifecycles. Fives describes the development as originating from customer requirements and frames it under its 'precision at scale' cross-brand message.