Industrial Machinery

KraussMaffei Extrusion Develops Single-Stage PVC InlineMixing Process for Roofing Membranes

The continuous route removes separate hot-cold mixing and reports energy-cost reductions of up to 75%, with an industrial reference line already operating at 1,800 kg/h.

Zahra QureshiNovember 17, 20265 min read0 views

A conceptual cutaway shows gravimetric feeders delivering polymer components directly to a twin-screw extruder, with the resulting sheet passing through calender rolls in a compact continuous line.

KraussMaffei Extrusion has developed a continuous single-stage extrusion process for PVC roofing membranes that it calls PVC InlineMixing. The system is designed to replace the conventional two-stage route in which a dryblend is first prepared in a separate hot-cold mixer and then plasticized in a twin-screw extruder. According to the company, the new route can cut energy consumption and costs, shorten production time and improve the return on investment.

In the traditional process, PVC powder, plasticizers, additives and fillers are processed batchwise into a dryblend. The material is cooled, stored and later plasticized in a twin-screw extruder before membrane forming. PVC InlineMixing removes that separate mixing stage. All solid and liquid components are fed directly into the extruder through gravimetric dosing systems, with each component added as required by the formulation.

Cost, space and energy effects

Because no separate heating-cooling-mixing combination is needed, manufacturers avoid investing in that equipment. The material also needs to be heated only once. KraussMaffei reports that energy consumption and related costs can fall by up to 75%, depending on the formulation, system parameters and location. The company also cites lower space requirements, reduced labor costs and lower maintenance costs, since wear parts for the heating-cooling mixer are no longer required. Together, the lower capital expenditure and operating costs are intended to support a faster payback.

Production flexibility is another stated benefit. Formulation adjustments and color changes can be made during operation through the integrated control system, according to KraussMaffei. This avoids the preparation and intermediate storage of separate dryblend batches. Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the approach offers membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing, allowing them to react faster to new requirements and adjust formulations during production while reducing energy and capital expenditure.

Validation and reference line

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and tested with industrial roofing-membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the combination of high torque and large free volume is intended to provide a wide process window for different formulations.

KraussMaffei says the tests confirmed good gelation of the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing-membrane production, and that the Technology Center works with customers to test specific formulations under production-relevant conditions and prepare for industrial implementation.

The process is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders. In that line, PVC, additives and fillers, as well as edge trimmings, are continuously processed into finished membranes. The reported energy savings remain dependent on formulation, equipment parameters and site conditions, while the validation work and the reference line provide the current evidence for the process.